ArticlesBlog

Cómo hacer un Check Disk para reparar errores redundancia Disco Duro Pendrive ó SD | Chkdsk Scandisk

Cómo hacer un Check Disk para reparar errores redundancia Disco Duro Pendrive ó SD | Chkdsk Scandisk


Good morning everyone. Today I will explain how we can
make a “Check disk” to our disk hard. I will explain it, so much to be able to do it
from Windows, as the way to do it from the boot, if your operating system
it does not start, so if you have that problem, during the video I will also comment that
steps you have to follow. For those who are not familiar with
This command and what is it for, the “Check disk “is used to check integrity
of our storage units, is say it works with both hard disks,
as in SSD disks, or even in drives removable as a pendrive or a card
SD. Although the part that interests us the most
Checkdisk, is that also repair errors logical in the file system, and sectors
damaged, all of this, without erasing anything from our hard disk or pendrive, so it’s totally
sure to use it. With this we managed to improve the state of
our unity, and revitalize the sectors that have become slow, so below
Let’s see how to do it. The first thing is to open a “Symbol” window
of the System “, and for that, in the search engine of Windows 10, below to the left we write
the word “CMD” and as you see it appears the System Symbol application. Although it is very important that you do not do it
click directly, because then we can not do the “Check disk”, so the way
correct to open the application is doing right click and selecting the option that
says “Run as administrator”. In the case that you have Windows 7, the method
it’s very similar, since you only have to do click on the start button, and below it will appear
the search engine, so you write “CMD”, and you click right to execute it as
Administrator. Now, what happens if you do not even
can you start Windows ?, since your system operative does not start correctly. By
what in that situation the method would be Start Windows using the recovery options
from the start. The way to do this and explain it in another
video where he talked about how to enter Mode Sure, in Windows 10, as in Windows
7, and whose link you have in the description. And basically it would consist of once we have
entered into the recovery options, we do click where it says “Solve problems”,
here we enter “Advanced Options” and finally we give it to where it says “Symbol
of the system “, and as we see immediately the window opens. Now that we are in “Symbol of the System”,
Frosty that in the part above put the word “Administrator” since that we
indicates that we have opened it correctly, or if you do not see that word, it’s that then
is not in “Administrator mode, and you would have than repeat the previous step. Once that is clear, we have to write
in this window these you see on the screen “Chkdsk C: / r” as you are seeing
without vowels, and then press “enter”. At this point it is very important that you know,
that in that command that we have written, we are indicating in which unit we want to do the
“Check disk”, specifically we have selected unit “C”, but if you wanted to examine
any other unit of your PC, just you would have to change the “C” for the letter
correspondent. I mean, I see, I have four units
storage, so if the unit that I want to repair out this one that has
the letter “D”, in that case it would have to write: “chkdsk D: / r”, or if you want
analyze my unit “E”, I would write “chkdsk E: / r “, so keep that in mind,
depending on which unit you want to check and repair of your PC. In my case I will do it with unit “C”,
which logically is where it is installed my operating system, so you can see
that there is no problem even in doing it on the main hard drive, but as I say,
you can do it in any unit, choosing always the letter of the corresponding unit
when writing the command. And when you hit “enter” this appears
text, which tells us that the “Check disk” it can not be executed because there is already another process
using the volume, and it gives us the option of if we want to execute the “Check disk” to
restart the PC, so we press the key “S” to say yes, and we give to
“Enter.” We get this confirmation message, and
Now with this we can close the Symbol window of the system. Now we restart the PC, and you will see that in
Once we start Windows we get this window, letting us know that the check is going to start
of the disk, so from here on you have to do nothing else, just wait
to the process ends. Of course, I advance you to make the Checkdisk
it requires a lot of time depending on the size of your hard drive, and errors
have the disk, so you have to have patience, being the most advisable to do
the “Check disk” when we are not going to use the PC for a few hours, in that way
be better prepared, than it may take to complete. Also keep in mind that it is not the same
analyze an SSD disk, whose speed is much greater, to a hard drive, which will be something
slower, so if it gives you the impression that the “Check disk” does not advance, as
For example, it is my case, which seems to have frozen to 11% do not worry,
since this is normal, and you have to have patience. Although I logically go to speed up the video,
so as not to make you wait and so I show you and the last seconds of the process. As we can see, once the PC is finished it
reboots on its own, and starts again Windows in a normal way, which indicates that
everything went well during the “Check disk”. By the way, if the “Check disk” you have
executed in Windows 7, instead of in Windows 10, in that case when restarting the PC, or it will come out
something like this, but the process would be the same, so just wait until it’s completed,
and at the end of the PC it will restart itself single. As I have already mentioned, we can also
use the “Check disk” to check and repair a secondary hard drive, or pendrive,
with the advantage that in that case, it is not necessary restart the PC. For example, I’m going to insert a pendrive in my PC,
and as we see Windows in this case has assigned the letter “H”. So I open the “Symbol of the system”
in Administrator mode, as I explained before, and now I’m going to write: “chkdsk H:
/ r “to examine unit” H “, which is the one that corresponds to the pendrive. If you notice, I have not had to restart
the equipment, and the check begins immediate, being also quite fast
as it is a pendrive of only 32GB. Although you notice that while it is running
the “Check disk”, I can not access the unit, since the volume has been dismantled
until the process ends. I’m going to speed up the video a bit
to go faster And at the end it appears to me that the
file system, without finding any problem, so everything is correct. Now that you know how to use the “Check disk”,
As a curiosity, I told you, maybe also you have seen somewhere, the command
“Chkdsk C: / f”, meaning replacing the “r” of the end by an “f”, for
what will you be wondering what difference there is between a “Check disk / r” and a “Check
disk “/ f” • And the answer is that the “/ f”, looks for errors
in the file system to solve them, but it does not look for defective sectors to repair them,
while the “/ r” does both, that is, the “Check disk / r” also includes
the “/ f”, so the most recommended is to always use the “/ r” in that way
Make the exam as complete as possible. I also remind you, that Windows brings some
tools that help us check and to have our units in good condition.
Specifically if we go to our units, and we right click on the one we want
check, and we select the option that says “Properties” will open this
window. Now we enter the tab that says “Tools”,
and we have two options, the first is “Check”, and if we press it Windows will look for errors
in the unit’s file system, it’s saying is similar to doing a “chkdsk / f”. In addition, we also have the option to defragment
the unit, if we click on the “Optimize” button, and then we select the unit that
we want to optimize, although defragment the disk does not repair any errors, but if
makes rigid hard drives work in a more effective way. That is, the “Units
hard drive “as you can see here. Although on the contrary, both discs
SSD hard drives such as pen drives or SD cards, which are the ones that say “Units of state
Solid “in the case of SSDs, and” the Removable Units “in the case of
USB flash drives, as a rule, do not need be defragmented, so have it in
account, to defragment only “the Hard drives “. Already before finishing, I take the opportunity to say,
that the “Check disk” is one of the forms where we can check and repair our
storage units, but it’s not the unique, so if you are looking for a program
that also helps you improve the state from your hard drive, using other methods,
I recommend the application “Victoria”, of which you also have in the channel, a
video tutorial I did a few weeks ago, and whose link is also in the description
of the video. And here the video, I hope you have been
useful to know all this information, If so, you can hit “Like”, or if you have
Any doubt leave it in the comments, and do not forget to subscribe.

Comments (32)

  1. Muy bien explicado gracias

  2. Como istalo ese fondo de pantalla que tienes, me gusto mucho

  3. Hola soy nuevo en este canal puedes hacer un video o decirme como podria reparar pantallazos azules hace 2 semanas formatie la pc intente muchos comandos incluyendo estos que usas en el video pero no funcionaron (me pasa seguido esto de los pantallazos azules) ya me canse de siempre tener que formatear y volver a instalar todo use muchos comandos y opciones de recuperacion pero nunca funcionan siempre tengo que formatear y reinstalar windows.

  4. Excelente aporte, gracias por compartirlo, un abrazo.

  5. Tiene el desfracmentador activado,eso daña la unidad solida.

  6. Hola que tal amigo necesito de su ayuda mi disco no me aparese en pantalla y tengo una información muy importante

  7. Gracias, he podido reparar un disco en el que me salia error de redundancia cíclica

  8. amigo AirXander sabes como puedo eliminar definitivamente $recycler.bin de mi disco portable de 2 teras samsung y tambien para mi laptop toshiba y para que jamas vuelva a aparecer $recycler.bin

  9. Por q de mí se queda en 11% ya está así 3horas help me!!!

  10. con el reparador desde el arranque como hago para ver en lista todas las unidades?

  11. Hola como puedo conseguir ese fondo de pantalla que tienes¿

  12. Me gustó el fondo de pantalla! puedes compartirlo?

  13. es seguro que no pasa nada con los archivos? no se pierden?

  14. Buen video bros.

  15. bro, necesito reparar la unidad G que tenia. y ahora me aparece error de redundancia ciclica pero al abrir el cmd y poner chkdsk G: /r , me aparece ''No se puede abrir el volumen para acceso directo''
    me quede estancado:c

  16. muchas gracias, fuiste el primero que he visto en explicar la diferencia entre /f y /r y sobretodo el único en decir que este proceso puede tardar horas, yo lo cancelaba por que pensaba que el disco estaba tan corrupto que colgaba la pc jajajajajaj ahora esta reparando mi disco duro externo y luego cuento como me fue, like!!!!

  17. Tuve pantalla azul ( windows 8.1 ) por instalar un programa, después me salio Error 0xc00000f, ahora reinicio y arranco desde el disco duro me aparece windows Please wait Recuperación Parece que windows no se cargo correctamente – ver opciones de reparación avanzada : entro y me sale Solucionar Problemas.
    Lo que sucede es que antes podía ingresar con mi contraseña de usuario, pero al poner unos codigos en Símbolo de sistema, cuando intento ingresar con esa contraseña dice que es incorrecta quisiera intentar recuperar mi windows
    puedo eliminar esa contraseña , cambiarla o de plano formatear Gracias

  18. amigo no me funciona tu metodo, me aparece un mensaje de que no tengo unos permisos…
    comentando tambien que el proceso lo aplique en distintos equipos…
    que mas puedo hacer?

  19. a mi me sale (el tipo de sistema de archivos es RAW. CHKDSK no esta disponible para unidades RAW) lo mio es una memoria SD

  20. Hola ami me sale esto : se denegó el acceso porq no tienes suficientes privilegios o el disco podría estar bloqueado x otro proceso . Ayudaaa

  21. buenas tardes tengo un problema. tengo un disco duro de 1 TB seagate de la noche a la mañana no me quiere reconocer en ninguna pc. window no le da ninguna letra. Trate de hacerlo manual por ¨"administracion de disco" y no me da la opcion de darle alguna letra. Lo bueno que tengo la informacion aun adentro no esta perdida lo vi en administracion de disco. me sale " disco 1 desconocido" sin inicalizar. noc que hacer y me gustaria que ayuda o qu medio puedo tomar para que pueda abrir solo al enchufar. gracias y feliz dia

  22. hola,lo hice para un disco duro portatil WD y me dice que no se puede leer el segmento de registro de cada archivo y tarda aprox 4 dias en pasarlo completo . esta bien esto ?

  23. tengo un disco duro externo y no me figura que unidad es ya tengo unidad c y d el disco duro externo sera e?

  24. Amigo en mi caso no puedo hacer esa solución por que el disco duro no esta inicializado es dexir el espacio no está asignado osea no aparece en el explorador de archivos pero si lo reconoce el pc, intento inicializar el disco desde el administrador de discos y es ahí cuando me aparece el error

  25. Hola amigo, gracias por tus videos, son de mucha ayuda! Pero en este caso mi unidad dice que tiene errores pero cuando uso el comando chkdsk; hace el chequeo pero no tarda como en ocasiones anteriores(no soluciona nada). Si pudieras ayudar te agradezco

  26. Gracias bro me salvastes se recuperó un disco duro de 500gb

  27. da gusto encontrar a personas como Ud. Gracias x lo bien explicado y x su trabajo. Des de España 29/11/2019

  28. Por favor ayúdame, tengo error de redundancia cíclica en un disco externo y de ahí no pasa. Ya hice todo lo que explicas y no me funciona nada. No sé que hacer, tengo muchos datos muy importantes. Ayuda!

  29. Mi unidad no tiene letra dice disco desconocido sin inicializar está en negro con rayitas cuando quiero darle click derecho sobre 149 gigabyte no asignado dice sólo propiedades su ayuda si voy al costado donde dice disco 1 doy inicializar disco me manda una pantalla mbr

  30. Excelente Ayuda!!!! Mil gracias por compartir!!!

  31. cuando pongo el comando 'chkdsk x: /r' me sale la leyenda: el tipo del sistema de archivos es ntfs no se puede bloquear la unidad actual. windows no puede ejecutar la comprobación del disco en este volumen porque esta protegido contra escritura.

    Y no me deja formatear ni instalar el sistema operativo, alguna sugerencia?

Comment here